Hand punch for plastic bags is a compact pneumatic punching unit for creating handle holes in PE, PP, OPP, PVC, CPP, laminated film, paper and non-woven bags. It can be integrated with a bag-making machine and customized to the required hole shape, web width and production speed.

Hand punch for plastic bags: key selection criteria

Nội dung bài viết

Bag material: specify film type, thickness and number of layers.
Hole geometry: provide the finished handle size, corner radius and position tolerance.
Machine interface: confirm installation space, feeding direction and mounting dimensions.
Air supply: verify working pressure, cylinder stroke and available pneumatic fittings.
Production rate: match the punch cycle to the bag-making machine speed.

Installation and trial procedure

Confirm the centerline and punching position on the film.
Mount the unit rigidly and align the cutting die with the support plate.
Connect regulated, clean and dry compressed air.
Run at low speed and inspect the first punched samples.
Increase speed only after the hole edge and waste discharge are stable.

For round or small-diameter holes, compare the wicket punch. For replaceable toothed cutting tools, see the toothed punch for plastic bags.

Maintenance and safety

Disconnect the air supply before cleaning or adjusting the punch. Remove film residue, check fasteners and inspect the cutting edge for chips or uneven wear. Keep hands away from the punching zone and use machine guards and interlocks appropriate to the production line.

Frequently asked questions

Can the handle shape be customized?

Yes. Send a drawing or bag sample with hole dimensions, corner radius and position requirements.

Can it punch multilayer film?

It may, depending on total thickness, material and edge geometry. A sample trial is recommended before production.

What details are required for a quotation?

Provide bag material, thickness, hole drawing, production speed, machine layout and expected order quantity.

Contact IES VNTECH for a custom hand punch quotation.

Hand punch for plastic bags xử lý nước thải

Handle hole series pneumatic hole punch: mainly applied to punch hole for PP, PE, OPP, PVC, CPP, aluminum foil, aluminized film and variety of plastic bag …

1. Product Information:

It is pneumatic type hole puncher, can punch a handle hole for plastic/paper/non-woven bag.

Usually should be installed on bag making machine and punch holes automatically.

Any hole size&shape can be customized.

Warranty: 3 months
Applicable Industries: Manufacturing Plant
Place of Origin: Iesvntech, Vietnam
Condition: New
Brand Name: CRJ Puncher
Model Number: handle hole
Product Name: hole punching machine
Hole Size: 65x20mm, customized
Hole Shape: handle hole
Passing Slot: Length 300mm, customized
Power Source: pneumatic
Cylinder: AirTAC cylinder
Mould Base: Aluminum alloy
Punching Knife: die steel from Japan
Punching Speed: up to 160/min